JL Audio 2 Ch. Class D Full-Range Amplifier 200 W - XD200/2v2

JL Audio 2 Ch. Class D Full-Range Amplifier 200 W - XD200/2v2

Model #:XD200/2v2

$649.95

Quote Request

Best Deal Promise

Description

2-Channel Class D Full-Range Amplifier, 100 W x 2 @ 2 Ω / 75 W x 2 @ 4 Ω - 14.4V

This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.

The XD200/2v2 includes a 12 dB / octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz.

The XD200/2v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.

This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.

Download the XDv2: Full-Range Amplifiers Catalog Sheet

Specification

Rated Continuous (RMS) Power @ 14.4 V

@ 4 Ω : 75 W RMS x 2
@ 2 Ω : 100 W RMS x 2
Bridged @ 4Ω : 200 W RMS x 1

Rated Continuous (RMS) Power @ 12.5 V

@ 4 Ω : 60 W RMS x 2
@ 2 Ω : 90 W RMS x 2
Bridged @ 4Ω : 180 W RMS x 1

General Specifications

Frequency Response : 12 Hz - 22 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power : >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W : >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω : >150 / 50 Hz
Damping Factor @ 2 Ω : >75 / 50 Hz
THD+N @ Rated Power : <1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs : Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
Min.Copper Power / Ground Wire Gauge : 8 AWG wire
Fuse Rating : 20 A (AFS, AGU or MaxiFuse™)

Signal Processing

Filter Mode(s) : Low-Pass or High-Pass
Filter Slope(s) : 12 dB/octave
Filter Frequency Range : 50 Hz - 500 Hz
Detented, Calibrated Filter Freq. Potentiometer : Yes
Filter Defeat Function : Yes
Remote Level Control : Optional (HD-RLC)
Security Cover for Controls : Yes
Pass-Through Preamp Output : Buffered

Physical Specifications

Height (H) : 2.05 in / 52 mm
Width (W) : 6.85 in / 174 mm
Depth (D) : 7.09 in / 180 mm
Net Weight : 3.75 lb / 1.70 kg