JL Audio 4 Ch. Class D Full-Range Marine Amplifier, 600 W, For 24V Systems - MHD600/4-24V
| $2,099.95 |
For 24V systems only:
4-Channel Class D Marine Full-Range Amplifier, 150 W x 4 @ 1.5-4 Ω
This compact, multi-channel powerhouse employs our Single-Cycle Control switching design and R.I.P.S. technology to deliver 150 W x 4 or 300 W x 2. Tight power supply regulation keeps distortion down and maximizes sound quality.
The MHD600/4-24V is the ideal satellite amplifier, delivering huge dynamics with pristine resolution. It can also be deployed, on its own, as a very capable 3-channel system amplifier with 150W x 2 to the satellites and 300W x 1 to a subwoofer system.
This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
This amplifier is designed for operation in vessels with 24 volt, negative-ground electrical systems. Use of this product in vessels with positive ground and/or voltages other than 24 V may result in damage to the product and will void the warranty.
Specification
Rated Continuous (RMS) Power @ 28.8 V
- @ 4 Ω : 150 W RMS x 4
- @ 3 Ω : 150 W RMS x 4
- @ 2 Ω : 150 W RMS x 4
- @ 1.5 Ω : 150 W RMS x 4
- Bridged @ 8 Ω : 300 W RMS x 2
- Bridged @ 4 Ω : 300 W RMS x 2
Rated Continuous (RMS) Power @ 25 V
- @ 4 Ω : 150 W RMS x 4
- @ 3 Ω : 150 W RMS x 4
- @ 2 Ω : 150 W RMS x 4
- @ 1.5 Ω : 150 W RMS x 4
- Bridged @ 8 Ω : 300 W RMS x 2
- Bridged @ 4 Ω : 300 W RMS x 2
General Specifications
- Frequency Response : 6 Hz - 30 kHz (+0, -1dB)
- S/N Ratio, referred to highest rated power : >110 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to 1 W : >88.2 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- Damping Factor @ 4 Ω : >300 / 50 Hz
- Damping Factor @ 2 Ω : >150 / 50 Hz
- THD+N @ Rated Power : <0.03% @ 4 Ω per Ch.
- Input Voltage Range @ RCA Inputs : Switchable from 200 mV - 2 V RMS to 800 mV - 8 V RMS
- Min.Copper Power / Ground Wire Gauge : 4 AWG wire
- Fuse Rating : 25 A (AFS, AGU or MaxiFuse™)
Signal Processing
- Filter Mode(s) : Low-Pass or High-Pass
- Filter Slope(s) : 12/24 dB/octave
- Filter Frequency Range : 50 Hz - 500 Hz
- Detented, Calibrated Filter Freq. Potentiometers : Yes
- Filter Defeat Function : Yes
- Remote Level Control : Optional (HD-RLC)
- Remote Level Modes : 2 or All Channels
- Channel Input Mode Switch : Yes (2/4 ch.)
- Pass-Through Preamp Output : Buffered
- Source Channel Selection for PreOuts : Yes
Physical Specifications
- Height (H) : 1.93 in / 49 mm
- Width (W) : 10.74 in / 273 mm
- Depth (D) : 8.29 in / 211 mm
Write a review
Featured Products
MV1000/5i
MV800/8i
MV600/6i
MHD900/5
MHD900/5-24V
