Kenwood Class D 5-Channel Power Amplifier - XM802-5
| WAS $649.00 |
|
$598.00 |
- RMS 50W x4 + 300W (4Ω)
- RMS 75W x4 + 500W (2Ω)
- Variable High & Low Pass Filter
- Bass Boost
- Conformal Coating
- Protective Terminal Cover
- Size (inch) (W) 9-3/4" x (H) 2-1/16" x (D) 6-5/8"
- Optional Wired Remote Ready
Product Overview
Smooth waveforms
Loss of smoothness
Fine waveforms
Rich and Immersive High-Resolution Audio
High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.
Output Coil with Magnetic Shield
Prevents magnetic flux from radiating from the subwoofer's coil, resulting in reduced noise and enhanced sound quality.
Conformal Coating
Improved moisture resistance of the circuit boards to prevent corrosion.
Protective Caps and Cover
All control holes,RCA, wired remote and Speaker Level input terminals are coverd with caps and plastic covers to avoid from moisture and dust.
Sliding Terminal Cover
Detachable sliding terminal cover offers a sleek design and easier installation.
One-side Connection
All terminals and connections are on one side for easier installation and a cleaner look.
- ①Fuse (30A x3)
- ②Battery terminal (POWER IN BATT.)
- ③Power control terminal
- ④Ground terminal (GND)
- ⑤Speaker output terminals (A.ch/B.ch)
- ⑥Speaker output terminals (Sub)
- ⑦Speaker level input terminal
- ⑧Remote terminal (Optional Remote Controler for Sub)
- ⑨Line in terminal (A.ch/B.ch/Sub)
Variable Gain Circuit
Improved Signal to Noise Ratio
- ⑩Input sensitivity control（A.ch/B.ch/Sub）
- ⑪Input selector switch
- ⑫Bass Boost Level control (Sub)
- ⑬LPF frequency control (SUB)
- ⑭Filter switch (A.ch/B.ch)
- ⑮HPF frequency control (A.ch/B.ch)
Speaker Level Input Harness
Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.
Optional Wired Level Control Ready
The optional KCA-RC01A wired remote level control allows you to easily adjust the subwoofer volume.
*Control unit does not support conformal coarting or water-proof.
Key Features
- High-Res Audio Compliant
- CTA-2006 Compliant
- 2 Ohms Load Capability
- One Sided Connection
- Speaker Level Input with Signal Sensing Turn-on
- Signal Sensing Turn-On
- Remote Level Control Ready ( Optional KCA-RC01A)
- Terminal Cover
- Power MOS-FET Switching Power Supply
- Extruded Aluminum Heat Sink Design
- A B Sub Independent Gain Adjustment
- A B AB(MIX) Independent Gain Adjustment
| CTA-2006 Primary Ratings | |
|---|---|
| Power Output | 50 Watts RMS x 4 + 300 Watts RMS x 1 at 4 Ohms and ≤1%THD+N |
| Signal-to-Noise Ratio | 80dBA (Reference: 1Watt into 4Ohms) |
| Maximum Power Output | |
| MAX POWER | 1600W |
| Rated Power Output at 14.4V | |
| A/B (4 Ohms) | 50Watts RMS x 4 (4 Ohms, 20-20kHz, ≤1.0% THD) |
| A/B (2 Ohms) | 75Watts RMS x 4 (2 Ohms, 1kHz, ≤1.0% THD) |
| SUB (4 Ohms) | 300Watts RMS x 1 (4 Ohms, 20-200Hz, ≤0.5% THD) |
| SUB (2 Ohms) | 500Watts RMS x 1 (2 Ohms, 100Hz, ≤0.5% THD) |
| A/B (Bridged 4Ohms) | 150Watts RMS x 2 (Bridged 4 Ohms, 1kHz, ≤1.0% THD) |
| Specifications | |
| Signal to Noise Ratio | 100dB (Reference: Rated Power into 4Ohms at 14.4V) |
| Frequency Response | 20Hz-50kHz (+0dB, -3dB) A/B |
| Audio Section | |
| Low-Pass Filter | 50Hz-200Hz, -24dB/oct (SUB) |
| Specifications | |
| Bridged Connection | 4Ω to 8Ω allowable |
| Speaker Impedance | 4Ω (2Ω to 8Ω allowable) |
| Input Impedance | 10k ohm |
| Frequency Response | 20Hz-200Hz (+0dB, -3dB) SUB |
| Audio Section | |
| High-Pass Filter | 50Hz-200Hz, -12dB/oct (A/B) |
| Infrasonic Filter | - |
| Bass Boost | 40Hz, 0dB - +18dB (SUB) |
| RCA Input Sensitivity | 0.2[V] - 5.0 [V] |
| Speaker Level Input Sensitivity | 4.0[V] - 12.0 [V] |
| Terminals | |
| Battery & Ground | M6 Screw Type Terminal Block |
| Speaker Output | M4 Screw Type Terminal Block |
| General | |
| Current Consumption | 42[A] |
| Operating Voltage | 14.4V（11-16V allowable） |
| Dimensions(WxHxD) | (W)9-3/4" x (H) 2-1/16” x (D)6-5/8” |
| Dimensions(WxHxD) | (W) 248mm x (H) 53mm x (D) 169mm |
| Weight | 4.6 lbs ( 2.1 kg) |
