Kenwood Class D Mono Power Amplifier - KAC-9106D

Model #:KAC-9106D

$499.00

Best Deal Promise

Max Power2000W
Rated Input Power
4 ohms 500W x 1
2 ohms 1000W x 1
Specifications
Signal to Noise Ratio: 100 dB1
Low Pass Filter: 50 - 200 Hz (-24 dB / oct.)1
Infrasonic Filter: 20 - 50 Hz (-24 dB / oct.)1
Bass Boost: 40 Hz (0 - +18 dB)1
Size(inch): (W)13-3/16" x (H)2-3/16" x (D)7-9/16"1
Weight(lbs): 6.2

Audio Section
RCA Input Sensitivity	0.2[V] - 5.0 [V]
Bass Boost	Built in Bass Boost Control (40Hz, 0dB-+18dB)
Infrasonic Filter	Built in Variable Infrasonic Filter (20Hz-50Hz, -24dB/oct)
Low-Pass Filter	Built in Variable Low-Pass Filter (50Hz-200Hz, -24dB/oct)
Specifications
Speaker Impedance	4Ω (2Ω to 8Ω allowable)
Input Impedance	10k ohm
Frequency Response	20Hz-200Hz (+0dB, -3dB) Class D
Signal to Noise Ratio	100dB (Reference: Rated Power into 4Ohms at 14.4V)
Power Output
Rated Power at 14.4V	500Watts RMS x [ch] (4 Ohms, 20-200Hz, ≤1.0% THD) 1000Watts RMS x [ch] (2 Ohms, 100Hz, ≤1.0% THD)
Maximum Power Output
MAX POWER	2000W
CEA-2006 Primary Ratings
Signal-to-Noise Ratio	76dBA (Reference: 1Watt into 4Ohms)
Power Output	500Watts RMS x 1 at 4 Ohms and ≤1%THD+N
General
Current Consumption	65 [A]
Operating Voltage	14.4V（11-16V allowable） [V]
Weight　 (kg)	2.8 [kg] 6.2 [lbs]
Dimensions(WxHxD)	335 [mm] x 56 [mm] x 192 [mm] 13-3/16 inch x 2-3/16 inch x 7-9/16 inch
Terminals
Line Out	RCA (Ni)
Speaker Input	JST Connector
Line In	RCA (Ni)
Speaker Output	Screw Type Terminal Block (Ni) (M4)
Battery & Ground	Screw Type Terminal Block (Ni) (M6)
Audio Section
Speaker Level Input Sensitivity	4.0[V] - 12.0 [V]