Morel 4 Inch Virtus Nano Woofer - MOVIR-NAN-CRB-MW4
| WAS $649.95 |
|
$589.95 / Pair |
We do not believe in one size fits all approach. This philosophy triggered the development of the Virtus Nano. It represents the essence of our innovative quest to push acoustic and mechanical boundaries and offer practical solutions to car audio enthusiasts. The Virtus nano series offers a new benchmark level in a two, three-way component and point source systems.
The Virtus Nano Integra leverages morel’s Integra design concept and the newly developed Nano technology design to offer a point source solution. Its innovative design a great balance of tonality and sound dispersion in very small form factor.
TECHNOLOGY
CARBON FIBER CONE
Derived from the drivers of our award-winning fat lady speaker system, this cone design is comprised of two exterior carbon fiber skins sandwiching a layer of Rohacell, a high strength, featherweight foam. The combination forms a cone that is light, strong and properly damped for naturally uncolored audio reproduction.
GRAND DOME GEOMETRY
Grand Dome Geometry membrane technology is a stiff, convex cone design that provides excellent off-axis performance enabling multiple speaker mount locations in the car. The well-damped, stiff cone design allows the speaker to produce excellent mid-bass frequencies.
INTEGRA
Derived from the word “integrate”, Integra is a speaker consisting of both a woofer and tweeter that share a common chassis. Unlike a coaxial, its recessed tweeter is concentrically aligned with the woofer cone. This minimizes phase error and allows the sound field to be constant in all directions, creating a near-perfect time alignment.
| Specifications | |
|---|---|
| Resonant Freq. Fs Hz | 95 |
| Sensitivity (2.83 V/1M) dB | 88 |
| Frequency response Hz | 80-9200 |
| Max. Trans. Pwr Handling Wrms | 300 |
| Power Handling Wrms | 90 |
| Nominal Impendance (ohm) 4 | 4 |
| Moving Mass MMS - gr/ounce | 8.57 (0.3) |
| QMS | 4.01 |
| QTS | 0.6 |
| Electrical Q Factor QES | 0.7 |
| Max. Linear Ex./Xmax mm (inch) | ±3mm (0.12) |
| BL Product/BXL | 4.68 |
| HE-Magnetic Gap Height mm (inch) | Neodymium Vented |
| Magnet System | Neodymium Vented |
| Voice Coil Induct. @1 kHz (mH) | 0.12 |
| DC Resistance (ohm) | 3 |
| Voice Coil Wire | Hexatech™ Aluminium |
| Voice Coil Type/Former | Aluminium |
| Voice Coil Height mm (inch) | 9 (0.35) |
| Voice Coil Diameter mm (inch) | 54 (2.16) |
| Net Wight gr | 376 |
| Mounting Cutout | 93 (3.6) |
| Mounting Depth mm (inch) | 17(0.7) |
| Unit Diameter mm(inch) | 109 (4.3) |
| Cone Material | Carbon + Foam Core |
| Cone Type | Carbon Cone |
| Effective Piston Area SD sq.cm (sq.inch) | 57(8.8) |
| Equiv. Can Air Load VAS - L (cu.ft3) | 1.48 (0.05) |
Write a review
Featured Products
MOMAX-ULT-603MK2
IP-UNI82
MOELA-CRBN-PRO63A
MOVIRT-NAN-CRB-INT62
R2-S653
MOELA-CRBN-MW5
HDZ-65
MOCDM-700
MOHYB-INT-52
MOELA-CRBN-PRO62A
MOVIR-NAN-CRB-MW4
